Sponsored By

Why shipowners should not delay BWTS installation to the last minuteWhy shipowners should not delay BWTS installation to the last minute

With all the focus on complying with the 2020 sulphur cap the IMO’s Ballast Water Management Convention (BWM Convention) has slipped off the agenda with the need to comply seemingly an accepted fact whatever the individual’s view on how the regulation has been executed.

Marcus Hand, Editor

October 5, 2018

3 Min Read
Kalyakan - stock.adobe.com

However, from 8 September 2019 all existing vessels built prior to the convention coming into force on 8 September 2017, will have to fit a ballast water treatment system (BWTS) at their next special survey if they do not already have one if the vessel is to continue international trading.

This gives owners a five year window in which to comply between 2019 and 2024 depending on when the vessel’s IOPP is due. While this may seem like plenty of time recent weeks have seen several organisations flag up that owners should not delay fitting systems until the last minute, given the tens of thousands of ships that require systems and the limited shipyard and engineering capacity to do this.

It is easy to understand why owners are trying to delay fitting a BWTS to the last possible minute. There is a simple fact of cost – they do not come cheap – and the investment is required at a time when shipping markets, although generally improved (excluding tankers) are hardly booming. Many early adopters have found that the systems they installed did not work as advertised, and in more extreme cases were deemed “inoperable”.

Read more: Operational problems continue with Ballast Water Treatment Systems: ABS

It also comes at a time when owners already have the cost of complying with the sulphur cap – be that fitting scrubbers, or for the majority the great unknown of how much low sulphur fuels will be from 1 January 2020.

But the Ballastwater Equipment Manufacturers’ Association (BEMA) sees these factors as reasons that owners should sort out compliance with the BWM Convention. Now a cynic might suggest “well they would say that wouldn’t they?”, but Mark Riggo president of BEMA also had point when in an open letter to shipowners on 21 September cautioning that it was “already the last possible minute”, while also recognising the difficulties some owners had experienced.

“September 8, 2019 is a very short time away. Between now and then, you will contend with a myriad of regulatory changes and disruptive events that impact your business. Between the sulphur cap on fuels, cyber-challenges, and shifts in global trade, you will be tasked with a number of challenges this year. Do not forget about ballast water treatment,” Riggo warned.

“Start your process now. If you have not installed a system on one of your ships, you absolutely need to now so you can learn how the system really works, how the company really performs, and what your crew needs to know before compliance is mandatory.”

Attend the Ballast Water Management: Knowledge is Compliance session at Seatrade Maritime Middle East

But it is not just the manufacturers saying this we’ve also had warnings from class and insurers.

ClassNK is advising owners to fit BWTS well ahead of time as it sees a large spike in retrofit numbers in 2022. Of 5,400 vessels registered with the Japanese class society that are yet to fit a system slightly over half, 2,832 vessels, have installation deadlines in 2022.

Read more: ClassNK warns owners not to wait for deadline to install ballast water systems

P&I Insurer Gard is also advising members that have not made a decision on BWTS installation to start preparatory work as soon as possible. “Even if the installation deadline may not be for several years, in order to save time and money there are multiple decisions that should be addressed now, e.g. to make sure the installation coincides with a scheduled dry docking,” it said in an alert.

While it is understandable that owners want to put of the time and cost of installing a BWTS till the last possible moment it is clear that is better to be prepared in advance rather than scrambling to comply at the last moment.

Read more about:

Ballast WaterUSCG

About the Author

Marcus Hand

Editor

Marcus Hand is the editor of Seatrade Maritime News and a dedicated maritime journalist with over two decades of experience covering the shipping industry in Asia.

Marcus is also an experienced industry commentator and has chaired many conferences and round tables. Before joining Seatrade at the beginning of 2010, Marcus worked for the shipping industry journal Lloyd's List for a decade and before that the Singapore Business Times covering shipping and aviation.

In November 2022, Marcus was announced as a member of the Board of Advisors to the Singapore Journal of Maritime Talent and Technology (SJMTT) to help bring together thought leadership around the key areas of talent and technology.

Marcus is the founder of the Seatrade Maritime Podcast that delivers commentary, opinions and conversations on shipping's most important topics.

Conferences & Webinars

Marcus Hand regularly moderates at international maritime events. Below you’ll find a list of selected past conferences and webinars.

Get the latest maritime news, analysis and more delivered to your inbox
Join 12,000+ members of the maritime community

You May Also Like